| Customization: | Available |
|---|---|
| Material: | Zinc-Plated Steel |
| Connection: | Press Connection |
|
Still deciding? Get samples of US$ 0.5/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
This series metal bend support with mounting plate shall be used where necessary to secure PEX tube at wall or floor penetrations.
Metal bend support shall form a tight radius without kinking the tube.
Mounting plate shall be designed with unique open corner to allow tube to be inserted after plate is installed and after tube end has been plugged.
Mounting plate shall include pre-drilled hole to fit 3/8" (#3) rebar ground stake to maintain 90-degree bend radius to organize tube underground before a pour.
Pilot holes along the plate perimeter shall be used when necessary to secure to any stud, joist, floor or any type of horizontal brace/ bracket.
Metal bend support shall be corrosion-resistant, zinc plated steel.
Secure plate to stud or sub floor. Insert PEX tube through center of plate. Carefully bend tube towards end of bend support.
Bend metal tab to trap tube from escaping. To maintain 90-degree bend radius during concrete pour, install 3/8" (#3) rebar through hole in plate, install tube bend tab to trap tube. If necessary, reinforce plate and bend support to the rebar with tie-wire or cable tie.
){kind=link}